PECOAT® Rufin Foda na Thermoplastic don Ƙarfe Guard Fences

Thermoplastic foda shafi sanannen hanya ce mai inganci don shafa shingen tsaro na ƙarfe. Ya ƙunshi shafa foda na thermoplastic a saman wani ƙarfe, wanda sai a yi zafi har sai ya narke kuma ya samar da Layer mai dorewa da kariya.

Fa'idodin Thermoplastic Powder Rufin don Ƙarfe Guard Fences

karko

Rubutun foda na Thermoplastic yana ba da sutura mai ɗorewa mai ɗorewa wanda ke da tsayayya ga tasiri, lalata, da lalata sinadarai. Hakanan yana da juriya ga yanayin yanayi, yana sa ya dace don aikace-aikacen waje.

Cost-tasiri

Thermoplastic foda shafi wani zaɓi ne mai araha don shingen tsaro na ƙarfe. Yana buƙatar ƙaramin shiri kuma yana da sauƙin amfani, wanda ke rage farashin aiki da lokaci.

-Arancin kulawa

Rufin thermoplastic yana da sauƙin tsaftacewa da kiyayewa. Yana tsayayya da tabo, lalata, da faduwa, wanda ya rage buƙatar kulawa na yau da kullum.

Kyawawan sha'awa

Thermoplastic foda coatings zo a cikin fadi da kewayon launuka , kyale domin gyare-gyare na karfe shinge shinge don saduwa da takamaiman zane da bukatun.

PECOAT® Thermoplastic foda coatings ne mai matukar tasiri da kuma m hanya domin shafi karfe tsare fences. Yana ba da kariya mai kariya wanda ke da tsayayya ga tasiri, abrasion, da lalata sinadarai, yana sa ya dace don aikace-aikacen waje. Rufin yana da sauƙi don amfani, mai tsada, kuma yana buƙatar kulawa kaɗan. Lokacin zabar wannan hanyar sutura, yana da mahimmanci a yi la'akari da yanayin muhalli, buƙatun ƙira, da abubuwan farashi don tabbatar da sakamako mafi kyau.

PECOAT® Rufin Foda na Thermoplastic don Ƙarfe Guard Fences

description

PECOAT Engineering polyethylene foda coatings su ne thermoplastic foda coatings shirya tare da high-yi polyethylene resins, compatibilizers, aikin Additives, pigments da fillers, da dai sauransu Yana da kyau kwarai mannewa, weather juriya da inji Properties, kazalika da kyau sinadaran kwanciyar hankali, Electrical rufi da low zazzabi juriya da anti- lalata Properties.

aikace-aikace Field

Ya dace da rufin kayan aikin injiniya kamar wuraren shakatawa, wuraren zama, hanyoyi, manyan tituna, titin jirgin ƙasa, shingen kariya na filin jirgin sama, da keɓewar bangarori.

Abubuwan Foda

• Abun da ba ya canzawa: ≥99.5%
• Busassun ruwa: Ruwan ruwa mai ruwa ≥ 20%
• Musamman nauyi: 0.91-0.95 (ya bambanta da launuka daban-daban)
• Rarraba girman barbashi: ≤300um
• Alamar narkewa: ≦10 g/10min (2.16kg, 190°C) [depending a kan shafi workpiece da abokin ciniki tsari]

Adana: ƙasa da 35 ° C, a cikin ɗaki mai bushewa, nesa da tushen wuta. Lokacin ajiya shine shekaru biyu daga ranar samarwa. Har ila yau ana iya amfani da shi idan ya wuce sake gwajin bayan ƙarewar. Hakanan ana ba da shawarar cewa amfani da samfuran ya bi ka'idar farko-in-farko
Shiryawa: Jakar takarda mai hade, nauyin net nauyi 20kg kowace jaka

Hanyar aikace-aikace

1. Pre-jiyya: degenreasing ta hanyar high zafin jiki Hanyar, sauran ƙarfi hanya, ko sinadaran hanya, sandblasting da tsatsa cire, surface na substrate ya zama tsaka tsaki bayan jiyya;
2. Workpiece preheating zafin jiki: 250-350 ° C [daidaitacce bisa ga zafi iya aiki na workpiece (watau karfe kauri)];
3. Gado mai ruwa tsoma shafi: 4-8 seconds [gyara bisa ga karfe kauri da kuma siffar workpiece];
4. Plasticization: 180-250 ° C, 0-5 mintuna [tsarin aikin filastik bayan dumama yana da amfani don samun sutura mai laushi a saman kayan aikin ƙarfe].
5. Cooling: sanyaya iska ko sanyaya yanayi

Tsarin Rufe Bed Mai Ruwa don shinge