Thermoplastic Polyethylene PE Hmoov Txheej Dawb Xim rau Cov Tub Txias Txias Txias Grids Basket
Introduction
PECOAT® Thermoplastic Polyethylene PE Powder Txheej Dawb Xim rau Cov Tub Yees Lub Txias Txias Txias Lub Pob Zeb Pob Zeb yog ua los ntawm high-pressure polyethylene (LDPE) resin, ntxiv ntau yam khoom siv ntxiv thiab xim pigments. nws yog tsim los rau lub tub yees daim phiaj, txee. Cov hmoov yog siv nrog fluidized txaj Cov txheej txheem dipping, Nws muaj cov tshuaj tiv thaiv zoo heev, tiv thaiv kev laus, cuam tshuam tsis kam, khoov tsis kam, acid tsis kam, corrosion kuj, thiab cov khoom zoo nkauj.
Cov yam ntxwv
- Cov tshuaj tiv thaiv zoo heev
- Zoo heev yooj thiab cuam tshuam tsis kam
- Zoo tsis kub tsis kam
- Haum rau qhov chaw txias txias.
- Non-toxic, Environmentally friendly
- Hu rau zaub mov
- Du tag
siv
Lub tub yees daim phiaj thiab pob tawb txee, lub freezer thawv racks
Specifications
| Yam | Standard | Test tshwm sim | |
| Zoo (visual) | Smooth | Ntxuas Sib | |
| Gloss% (GB9754,60 °) | 55% -60% | 57% | |
| Xim (GB9761) | Ib yam los ntawm kev pom | Ntxuas Sib | |
| Kev nqus tshwj xeeb | 0.92-0.95 | 0.95 | |
| Qhov nruab nrab particle loj | 220-280 : kuv | Ntxuas Sib | |
| Vica softening point (ºC) (GB 1633) |
70-88 | Ntxuas Sib | |
| Khoov (zaj duab xis Thickness 200μm) (GB 6742) |
≤2mm | Ntxuas Sib | |
| Lub zog hluav taws xob Kv / mm (GB 1408) |
≥19 | Ntxuas Sib | |
| Tsawg kub ua hauj (Q/HJ008-2003) |
-35ºC, 60h tsis tawg | Ntxuas Sib | |
| Tshuaj ua hauj Tseem Tshuav |
5% HCI so 7d (GB/T1865) |
Cov tsos ntawm txheej tsis muaj kev hloov pauv | Ntxuas Sib |
| 5% NaOHsoak7d (GB/T1763) |
Cov tsos ntawm txheej tsis muaj kev hloov pauv | Ntxuas Sib | |
| 5% NaCI soak7d (GB / T1763) | Cov tsos ntawm txheej tsis muaj kev hloov pauv | Ntxuas Sib | |
Daim ntawv thov rau PE hmoov txheej rau tub yees txee
- Pre-treatment substrate: Raws li lub substrate thiab qhov yuav tsum tau ua tau zoo, qhov saum npoo ntawm kho substrate yuav tsum nruab nrab.
- Pre-heat kub: 280-330 ℃ (Kho raws li lub tshav kub muaj peev xwm ntawm lub workpiece thiab chav tsev kub.)
- Dwell Timefor dipping hauv lub txaj dej: 3-20 vib nas this (kho raws li cov neeg siv khoom xav tau thickness thiab workpiece)
- Tom qab kub kub thiab lub sij hawm: 180-220 ℃ / 2-5 feeb (Kho raws li lub tshav kub muaj peev xwm ntawm lub workpiece thiab lub melt flow Performance index ntawm hmoov)
- Txias: Cua txias los yog txias txias rau chav sov.
Daim ntawv ceeb toom kev nyab xeeb - Kev nyab xeeb nrog zaub mov thiab dej
Ntim thiab Cia Khoom
25kg / lub hnab
- Khaws rau hauv qhov chaw qhuav qhuav tsawg dua 40 ℃ thiab tawm ntawm tshav ntuj, lub sijhawm khaws cia 2 xyoos.
- Tom qab tas sij hawm, nws tseem tuaj yeem siv tau yog tias tsis muaj teeb meem zoo tom qab kuaj.
- PECOAT®PE hmoov tsis tuaj yeem tov nrog hmoov los ntawm lwm tus neeg muag khoom.
Hais txog Thermoplastic Polyethylene PE Powder Coating White Colour rau Lub Tub Yees Txias Txee Grids Basket, thov koj xav tiv tauj peb rau cov qauv kuaj.
Siv Videos
Fluidized txaj Dipping txheej txheem rau Thermoplastic Polyethylene PE Hmoov Txheej
