Gịnị mere Anyị

Thermoplastic mkpuchi dip ntụ ntụ bụ ụdị ihe mkpuchi ntụ ntụ nke a na-etinye site na iji usoro ntinye akwa akwa. A na-emikpu akụkụ ndị a kpochara ọkụ n'ime hopper nwere mkpuchi ntụ ntụ thermoplastic. A na-adọta ntụ ntụ ma mechaa tụba n'elu ọkụ.

Thermoplastic mkpuchi na-abụkarị n'ụdị ntụ ntụ. Ọ naghị emeghachi omume n'oge okpomọkụ. A na-ebu ụzọ kpoo elu igwe ahụ ka ọ bụrụ okpomọkụ achọrọ. Ngwunye na-esote, usoro ikpo ọkụ na nke dị jụụ na-eme ka mkpuchi ahụ dịkwuo elu, sie ike ma nweta ume na arụmọrụ dị mma.

PECOAT® thermoplastic polyethylene ntụ ntụ mkpuchi na PVC mkpuchi ntụ ntụ prevails n'elu mkpuchi ndị ọzọ maka ịrụ ọrụ magburu onwe ya na ọnụ ahịa dị elu. Isi uru dị n'ime ike adhesion ya dị elu nke na-eme ka mkpuchi ahụ na-eguzogide mmetụta nke ukwuu, ma ọ bụ na-akpụ akpụ, ọbụnadị peeled.

• Enwere ike idobe mkpuchi ntụ ntụ Thermoplastic na mkpuchi dị oke karịa karịa nhọrọ mkpuchi ntụ ntụ ndị ọzọ. Ha na-enwe mmetụta dị nro ma dị mma imetụ aka karịa mkpuchi shei siri ike.
• Ihe mkpuchi plastik siri ike bụ ihe mkpuchi ọkụ eletrik mara mma. Ọ na-emekwa ka ihe ndị a kpuchiri ekpuchi adịghị adịte aka n'ihe gbasara nnyefe okpomọkụ.
• Ihe thermoplastic na-agbaze ma na-asọba iji mepụta ebe dị mma, na-aga n'ihu nke na-ekpuchi akụkụ nke ọma, ọ na-adịte aka ma nwee ezigbo nguzogide UV maka njigide agba.
• E jiri ya tụnyere ihe mkpuchi ntụ ntụ thermoset, mkpuchi thermoplastic enweghị VOC, halogens ma ọ bụ BPA ma na-ahụ maka gburugburu ebe obibi.

Njirimara pụrụ iche nke mkpuchi thermoplastic na-eme ka ha baa uru nke ukwuu n'ọtụtụ ngwa. PECOAT® thermoplastic mkpuchi itinye ntụ ntụ - polyethylene na PVC A na-eji mkpuchi ntụ ntụ eme ihe na:

• Ngwunye ụlọ
• Akpaaka akụkụ
• Mkpuchi profaịlụ aluminom
• Mpempe windo
• Ime ụlọ na ime ụlọ n'èzí
• Ihe owuwu
• Mgbọ ígwè na okporo ígwè
• Mpaghara ọrụ nri
• Ngosipụta ngwa ahịa, wdg.

Ụlọ ọrụ dị iche iche nwere ihe dịgasị iche iche chọrọ maka ngwaahịa, ihe ndị a chọrọ na-agbatị na arụmọrụ nke mkpuchi a na-etinye, gụnyere ihe ndị dị ka mkpuchi mkpuchi, ike siri ike, nkwụsị ọkụ, adhesion, na ọdịdị.

Enwere ọtụtụ ihe eji dị ka mkpuchi ntụ ntụ thermoplastic, gụnyere polyethylene, PVC, naịlọn, polypropylene. Nhọrọ ahụ kwesịrị ịdabere na ihe achọrọ maka ngwaahịa a ga-ekpuchi ya.

Polyethylene ntụ ntụ mkpuchi bụ nke a na-ejikarị eme ihe, mkpuchi ahụ nwere nguzogide kemịkalụ magburu onwe ya, mgbochi ịka nká, mmetụta na-eguzogide, nkwụsị na-ehulata, nkwụsị acid, nnu na-eguzogide corrosion nnu, ma nwee ọrụ mma elu ka mma. N'ihi ya ezigbo ihe mkpuchi ọkụ eletrik, a na-ejikarị ya na ngwa ebe ndị ọrụ na-emekọ ihe ugboro ugboro, dị ka aka na ụgbọ ala ụgbọ oloko.

Ihe mkpuchi polyvinyl (PVC) na-achọkarị primer iji nweta njikọ siri ike na ihe a ga-ekpuchi ma na-ejigide mgbanwe nke na-eme ka ha dị mma maka ngwa ngwa ebe ihe ndị ahụ na-arụ ọrụ na-emepụta ihe na-emepụta ihe, dị ka ịgbagọ na ịbịaru.

Ihe mkpuchi naịlọn na-achọkwa primer maka mmachi kacha mma, mkpuchi nylon na-esi ike na-eyi ya na oke esemokwu dị oke ala, a na-ejikarị ya eme ihe maka bearings na ngwa ndị ọzọ nwere akụkụ na-akpụ akpụ.