Polyether TPU
PECOAT® Polyether TPU
Polyether Extrusion TPU
E ka kopana le maemo a FDA le maemo a 61 a NSF; ikamahanya le khanya ea lelakabe ea UL 94-VO e pepeneneng, karete e mosehla ea UL, khanyetso e ntle ea hydrolysis, ho feto-fetoha ha mocheso o tlase, anti-microbial, anti-mold, ho ruruha ha metsi a tlase, pepeneneng e phahameng le ntlha e tlase ea kristallise, anti-yellowing e ntle haholo, boholo bo tsitsitseng ba ts'ebetso. , le thepa e phahameng ea 'mele e nang le likarolo tse phahameng tse bapisang. Sehlahisoa sena se sebelisoa haholo lihlahisoa tse fetisitsoeng tse kang lithapo tsa mollo, lithapo tsa likoloi le tsa leoatleng, likhoele tsa geophysical, likhoele tsa matla a moea, likhoele tsa letsoho tsa roboto, likhoele tse hulang, liphaephe, liphaephe tsa metsi a nooang, mabanta a tsamaisang mochini oa lijo le mabanta a indasteri. . Ea rona TPU e ka etsoa ka mokhoa o ikhethileng ho fihlela boemo ba VW-1, matte, semi-gloss, le litlhoko tse ling tse ikhethang.
Ente ea Polyether TPU
E kopana le maemo a FDA mme e fetisa biocompatibility ISO 10993-5/-10, karete e mosehla ea UL, e nang le khanyetso ea hydrolysis, ho feto-fetoha ha mocheso o tlase, anti-mold, ho ruruha ha metsi a tlase, ho ama hamonate, pepeneneng e phahameng, ho tiea, matla a phahameng, le ho bōptjoa ka potlako le ho sebetsa habonolo. E sebelisoa haholo lisebelisoa tse aparoang, lihlahisoa tsa elektroniki tsa IT, lieta tsa ski, likoloi le tsa metsing, lipalangoang tsa terene, mechini ea lijo, lintho tsa ho bapala tsa bana le lihlahisoa tse ling tsa kantle.
Items | Unit | Boleng bo tloaelehileng | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
thatafala | Lebopo-A/D | 60A | 65A | 70A | 75A | 80A | 85A | 90A | 95A | 55D | 65D | 75D |
Boima bo tebileng | g / cm3 | 1.1 | 1.1 | 1.12 | 1.13 | 1.14 | 1.16 | 1.18 | 1.18 | 1.19 | 1.21 | 1.22 |
Matla a tšepe | MPa | 13 | 17 | 20 | 26 | 32 | 32 | 39 | 45 | 48 | 55 | 60 |
Tensile modulus 100% | MPa | 2.2 | 2.7 | 3.5 | 4 | 5.2 | 6.1 | 7 | 9 | 11 | 13 | 17 |
Tensile modulus 300% | MPa | 5 | 6 | 8 | 9 | 10 | 12 | 16 | 26 | 30 | 32 | 37 |
Elongation nakong ea khefu | % | 950 | 900 | 780 | 730 | 680 | 550 | 500 | 480 | 420 | 400 | 300 |
Matla a lla | KN/mm | 55 | 60 | 66 | 75 | 82 | 95 | 107 | 112 | 120 | 131 | 150 |
Mocheso o sisinyehang oa ho qhibiliha | 160-220 ° C | |||||||||||
Nako ea ho omisa | EA-3H-4H | |||||||||||
Ho omisa mocheso | 90-100 ° C |
TPU lintho tse bonahalang
TPU E fetotsoe