Mbido » Mkpuchi ntụ ntụ akwa mmiri mmiri, mkpuchi ntụ ntụ na-ekpo ọkụ » Polyvinyl chloride Thermoplastic PVC Nkọcha ntụ ntụ

Polyvinyl chloride Thermoplastic PVC Nkọcha ntụ ntụ

Thermoplastic PE Polyethylene ntụ ntụ mkpuchi

PECOAT® Polyvinyl chloride ntụ ntụ maka PVC Nkọcha ntụ ntụ

PECOAT® PVC mkpuchi ntụ ntụ bụ ụdị thermoplastic ntụ ntụ mkpuchi emebere ka ọ dị mma maka mmiri mmiri bed usoro itinye mmiri. Emere ya site na polyvinyl chloride (PVC) resin dị ka ihe ndabere na ịgbakwunye plasticizers, pigmenti na ihe mgbakwunye ndị ọzọ. Ụdị mkpuchi a nwere kemịkalụ dị mma, nguzogide anụ ahụ na arụ ọrụ, a na-ejikarị ya eme ihe na ngwa ebe a na-achọ mgbanwe, ịdịte aka, na iguzogide gburugburu ebe siri ike.

atụmatụ
ntupu welded nke ejiri thermoplastic pvc ntụ ntụ mkpuchi kpuchie
waya ekpuchiri na thermoplastic pvc ntụ ntụ mkpuchi_

Polyvinyl chloride (PVC) mkpuchi ntụ ntụ nwere ezigbo nguzogide ihu igwe, nguzogide corrosion dị mma, ike igwe dị elu, mkpuchi ọkụ eletrik dị mma. Ọ dịkwa ọnụ ala na ọnụ ahịa dị irè.

Otú ọ dị, PVC mkpuchi ntụ ntụ nwekwara ụfọdụ ọghọm. The okpomọkụ dị iche n'etiti agbaze okpomọkụ na decomposition okpomọkụ nke PVC resin dị ntakịrị, na njikwa okpomọkụ dị ntakịrị iji zere ire ere nke mkpuchi n'oge usoro mkpuchi. A na-ewepụta gas na-emerụ ahụ n'oge usoro ntinye. Elu mkpuchi ahụ dị ntakịrị ma ọ siri ike itinye akwa mkpuchi. N'ihi ogbenye adhesion nke PVC mkpuchi, a chọrọ primer pụrụ iche maka ngwaahịa ndị na-achọ nnukwu adhesion.

Agba ụfọdụ ewu ewu

Anyị nwere ike inye agba ọ bụla ahaziri iche iji kwekọọ na mkpa gị.

Agba ntụ --Oji
Akwụkwọ ndụ gbara ọchịchịrị------Brik uhie
ọcha oroma polyethylene ntụ ntụ
Ọcha -------Orike
Ọla na-acha anụnụ anụnụ----Light Blue
Jiri Ahịa

PECOAT® ihe na-ekpo ọkụ PVC A na-emepụta mkpuchi ntụ ntụ maka ịdị ike, na-adịgide adịgide na arụ ọrụ mgbochi corrosion, na-enweghị primer. Ya otu oyi akwa thermoplastic mkpuchi na-enye ogologo oge na-azọpụta na mmezi, ihe onwunwe na-akwụ ụgwọ na-arụ ọrụ na-eri , na-eji a dịgasị iche iche nke ụlọ ọrụ, dị ka electro-welded netwọk, welded waya ntupu, ígwè waya, ígwè ọkpọkọ, punching ntupu; ogige, ogige, ogige nsu, ngere okporo ụzọ, ngere obibi, ngwa ọrụ nka, ụlọ ahịa ụlọ ahịa shelf, hanga, nkata igwe kwụ otu ebe, ebe ozuzu; okporo ụzọ nche, wdg.

pvc thermoplastic ntụ ntụ mkpuchi welded ntupu nsu
pvc ntụ ntụ mkpuchi maka electro-welded ntupu nsu
Jiri .zọ
thermoplastic pvc ntụ ntụ iji usoro

Usoro itinye mmiri n'ihe ndina

  1. Ngwọta mbụ: hichaa ma wepụ nchara na mmanụ site na phosphating ma ọ bụ ájá ájá.
  2. Ngwa Primer: Iji nye ezigbo nrapado, a na-etinye primer pụrụ iche (nke dabeere na mmiri) site n'imimi ma ọ bụ brushing.
  3. Workpiece preheating: 250-300C (doziri dị ka workpiece, ntụgharị metal ọkpụrụkpụ)
  4. Tinye n'ime akwa akwa mmiri: 4-20 sekọnd (gbanwere dị ka ọkpụrụkpụ ọla na ọdịdị ya si dị)
  5. Mgbe ikpo ọkụ ga-agwọta: 230-250 ° C, 0-5 nkeji 
  6. Ntu oyi: ikuku jụrụ oyi ma ọ bụ oyi eke
mbukota

25kg/akpa

PECOAT® thermoplastic PVC A na-ebu ụzọ wụnye ntụ ntụ n'ime akpa rọba iji gbochie ngwaahịa ahụ ka ọ ghara imetọ ya na iru mmiri, yana ka ọ ghara ịgbanarị ntụ ntụ. Mgbe ahụ, jupụta na akpa a kpara akpa iji nọgide na-eguzosi ike n'ezi ihe ma gbochie akpa rọba dị n'ime ka ihe ndị dị nkọ mebie. N'ikpeazụ palletize akpa niile ma kechie ya na nnukwu ihe nkiri nchebe iji kechie ibu ahụ.

Ugbu a dị njikere maka nnyefe!

Rịọ ihe nlele

Ihe nlele na-eme ka ị ghọta ngwaahịa anyị kpamkpam. Nnwale zuru oke na-eme ka ị kwenye na ngwaahịa anyị nwere ike ịrụ ọrụ nke ọma na ọrụ gị. A na-eji nlezianya họrọ ma ọ bụ ahaziri nke ọ bụla n'ime ihe atụ anyị dịka ndị ahịa si dị. Site na nhazi usoro, nhọrọ akụrụngwa na mmepụta, anyị na-etinye mgbalị dị ukwuu iji hụ na mmalite nke imekọ ihe nke ọma.

Ọnọdụ mkpụrụ dị iche iche nwere ihe dị iche iche a chọrọ maka ihe mkpuchi, dị ka adhesion, ike na-asọ asọ, ntachi obi okpomọkụ, wdg, ozi ndị a bụ ihe ndabere nke imepụta ihe nlele anyị.

Ka iwelie ohere nke ịga nke ọma nke nlele nlele, na ịbụ onye na-ahụ maka akụkụ abụọ ahụ, jiri obiọma nye ozi ndị a. Daalụ nke ukwuu maka ọgwụgwọ gị na imekọ ihe ọnụ.

    Ụdị ntụ ntụ

    Ọnụọgụ ịchọrọ ịnwale:

    Ngwaahịa na-eji gburugburu ebe obibi

    Ihe eji eme ihe

    Iji hụ na anyị nwere ike ịghọta mkpa gị ngwa ngwa na nke ọma, anyị ga-enwe ekele dị ukwuu ma ọ bụrụ na ị nwere ike bulite foto ngwaahịa gị n'oge dị gị mma:


    FAQ

    Iji nye ọnụahịa ziri ezi, achọrọ ozi ndị a.
    • Kedu ngwaahịa ị na-eyi? Ọ ka mma iziga anyị foto.
    • Gịnị bụ mkpụrụ ihe onwunwe, galvanized ma ọ bụ na-abụghị galvanized?
    • Maka ule nlele, 1-25kg / agba, zipu site na ikuku.
    • Maka usoro iwu, 1000kg / agba, zipu site n'oké osimiri.
    2-6 ụbọchị ọrụ mgbe ịkwụ ụgwọ mbụ.
    Ee, ihe nlele efu bụ 1-3kg, mana ụgwọ njem abụghị n'efu. Maka nkọwa, biko pịa Rịọ ihe nlele
    Biko rụtụ aka na nke a isiokwu
    Enwere ntụnye ụfọdụ:
    1. Mwepụ igwe: Jiri ngwaọrụ dị ka aja aja, brushes waya, ma ọ bụ wiil abrasive iji kpochapu ma ọ bụ tufuo mkpuchi ahụ.
    2. Igwe ọkụ: Tinye ọkụ na mkpuchi ahụ site na iji egbe ọkụ ma ọ bụ ngwaọrụ ndị ọzọ na-ekpo ọkụ iji mee ka mwepụ ya dị mfe.
    3. Ndị na-ewepụ ihe kemịkalụ: Jiri kemịkalụ kemịkalụ kwesịrị ekwesị emebere maka mkpuchi ntụ ntụ, mana soro echekwabara nchekwa mgbe ị na-eji ha. Nke a bụ acid siri ike ma ọ bụ ntọala siri ike. 
    4. Sandblasting: Usoro a nwere ike wepu mkpuchi mana ọ chọrọ igwe na-agba aja aja.
    5. Scraping: Jiri ngwá ọrụ dị nkọ jiri nlezianya kpochapụ ihe mkpuchi ahụ.
    Ngwa nrapado (nhọrọ)
    PECOAT Ihe nrapado Primer maka mkpuchi thermoplastic (Nhọrọ)
    PECOAT® Adhesive Primer. Ngwungwu 4KG/Sample

    Dabere na ahịa dị iche iche, ụfọdụ ngwaahịa na-eme ka adhesion siri ike maka mkpuchi. Agbanyeghị, PVC mkpuchi n'onwe ya enweghị akụrụngwa adhesion. N'ihi nke a, PECOAT® emebela primer nrapado pụrụ iche iji kwalite ikike nrapado nke PVC mkpuchi . Naanị kpochaa ma ọ bụ fesa ha n'otu n'otu n'elu igwe ka a na-ekpuchi ya tupu usoro ntinye. Ngwakọta ngwaahịa a na-eji primer nrapado emeso ya na-egosipụta nrapado pụrụiche na mkpuchi rọba, ọ na-esikwa ike ịkpụcha ya.

    • Na-arụ ọrụ okpomọkụ: 230-270 ℃
    • Nkwakọ ngwaahịa: 20kg / ọkpọ plastik
    • Agba: transperent na enweghị agba
    • Nnukwu ike ndọda: 0.92-0.93 g/cm3
    • Nchekwa: 1 afọ
    • Jiri usoro: ahịhịa ma ọ bụ fesa
    Jiri Usoro

    Ntupu waya ejiri welded kpuchie ya PECOAT 601 PVC Nkọcha ntụ ntụ
    Ogidi okporo ụzọ Guardrail ejiri kpuchie ya PVC ntụ ntụ
    Ekpuchiri eriri waya Gabion PVC Nkọcha ntụ ntụ
    Nko Ntupu Ekpuchiri ya PVC ntụ ntụ
    Jiri vidiyo

    Onye ọkpụkpọ YouTube

    Onye ọkpụkpọ YouTube
    njikọ Product
    PVC Ngwa Ngwa Mkpuchi Ntụ ntụ
    Mpịakọta waya ntupu PVC Ngwa Mkpuchi Ntụ ntụ
    Dutch waya ntupu ịgbado ọkụ waya ntupu mmepụta plastic mkpuchi akụrụngwa7
    Ahịrị mkpuchi mkpuchi waya welded
    Ahịrị mkpuchi mkpuchi akwa mmiri na-akpaghị aka maka shelf waya 8
    Mkpuchi ntụ ntụ akwa mmiri mmiri Equipment
    Industry News
    PVC Mkpuchi ntụ ntụ Maka ntupu Dutch Waya welded ntupu

    Ihe ngbasi PVC Mkpuchi ntụ ntụ Maka ntupu Dutch Waya welded ntupu

    PVC Ntupu waya Dutch kpuchiri uzuzu bụ ụdị ngwaahịa ntupu igwe gbadoro anya. Ntupu waya na-agbagọ...
    Nzọụkwụ izugbe ịchọta PVC ndị na-ebu ihe mkpuchi ntụ ntụ

    PVC Ndị na-ebu ihe mkpuchi ntụ ntụ na China

    Nzọụkwụ izugbe ịchọta PVC Ndị na-eweta mkpuchi ntụ ntụ sitere na China Enweghị m ohere ịnweta ozi oge ma ọ bụ kpọmkwem ...
    electrostatic ọkwa pvc ntụ ntụ mkpuchi

    Electrostatic Spray Polyvinyl ChloridePVC) mkpuchi ntụ ntụ: Ntuziaka dị omimi 

    Electrostatic spray polyvinyl chloride (PVC) mkpuchi ntụ ntụ bụ teknụzụ na-emecha elu nke na-enye ngwakọta pụrụ iche nke ...
    PVC Ihe mkpuchi ntụ ntụ kpuchiri eriri igwe

    Polyvinyl chloride (PVC) Ihe mkpuchi ntụ ntụ - Mepụta, ngwa, ntinye

    Akwụkwọ a na-atụle mmepe nke polyvinyl chloride.PVC) mkpuchi ntụ ntụ n'ụlọ na mba ọzọ, na-ewebata usoro bụ isi, nkwadebe ...
    PVC Mkpuchi ntụ ntụ Maka ntupu Dutch Waya welded ntupu

    PVC Mkpuchi na mkpuchi ntụ ntụ

    PVC mkpuchi na mkpuchi ntụ ntụ bụ ụzọ abụọ dị iche iche nke itinye akwa mkpuchi n'elu igwe. Mgbe ha abụọ ...
    Akwado akwa

    Thermoplastic Polyethylene LDPE Uwe ntụ ntụ maka akwa akwa akwa

    Thermoplastic polyethylene LDPE ntụ ntụ mkpuchi maka akwa akwa ọla bụ ihe mkpuchi na-ewe obere - density polyethylene (LDPE) ...
    Tinye ahịrị mkpuchi ntụ ntụ maka mgbochi-arịgoro Net Mesh Waya

    Ahịrị mkpuchi mkpuchi ntụ ntụ nke ọkara akpaka maka mgbochi ịrị elu Net Mesh Waya

    IHE ECHICHE Nhazi nke ahịrị mmepụta ihe mkpuchi nke ọkara akpaka na-elekwasị anya n'izute mkpuchi mkpuchi ma ọ bụ pvc ...
    PVC Uwe Plastisol iji chebe karama iko ọgwụ

    Iji PVC Uwe Plastisol iji chebe karama iko ọgwụ

    iji PVC Ihe mkpuchi plastisol iji chebe karama iko ọgwụ bụ ụzọ teknụzụ enwere ike, nke nwere ike inye karama iko ...
    njehie: