Description
PECOAT® PECO656 LDPE itinye mkpuchi powder is purpose-built for fishing sinkers, designed to stand up to harsh real-world fishing conditions: repeated saltwater exposure, impact against rocks and abrasion during retrievals, where regular paint easily chips and fails.Pre-heat your sinker to 230°C, dip for 2-3 seconds. The powder melts on contact and fuses into a continuous, tough non-porous polyethylene skin that cures in around 5 minutes.
Uru Dị Mkpa
- Creates a protective barrier against salt, water and silt, preventing lead discolouration and steel rust around the swivel eye.
- Strong thermal fusion bond to pre-heated metal, resisting flaking after repeated fishing trips.
- Smooth, drip-and tail-free glossy or matt finish with no post-trimming required.
- Solvent-free formula; no primer or curing agent needed. Basic workshop ventilation is sufficient.
Standard Colours
- Họrọ n'ime anyị RAL Color Catalog
- Custom color: Send your physical color shade to us for matching
Nka na ụzụ Data
| njupụta | Ihe ruru. 0.92 g/cm³ |
| Agbaze agbaze | 105-115 ° C |
| Recommended preheat | 220-300 Celsius C |
| Dip time | 2–3 seconds per coat |
| Ịse uhie | 0.3–0.5 mm from a single dip; up to about 1.0 mm with a second dip |
| Okpomọkụ ọrụ na-aga n'ihu | Ruo 80 Celsius |
| Chemical na-eguzogide | Fresh and salt water, dilute acids and alkalis, alcohols. Not for continuous contact with fuels or strong solvents. |
| Nchekwa na ndụ nchekwa | Dry, below 30 °C, out of direct sunlight; 24 months unopened |
| nnabata | REACH-SVHC and RoHS statements on request; food-contact grade on request |












Nyocha
E nweghị ndị na reviews ma.