tshebediso PVC Plastisol Coat ho Sireletsa Botlolo ea Khalase ea Meriana

U sebelisa PVC ho roala ka plastisol ho sireletsa libotlolo tsa khalase ea meriana ke mokhoa o ka khonehang oa ho etsa botekgeniki, o ka fang libotlolo tsa khalase ka mesebetsi e kang ho hanyetsa tšusumetso, ho thibela ho thella le ho hanyetsa ho bola ha lik'hemik'hale. Se latelang ke selelekela se qaqileng sa ts'ebeliso ena, ho kenyelletsa melemo, lits'ebetso, maikutlo, le litharollo tse ling:

Melemo ea ho PVC Ho roala ka Plastisol bakeng sa Libotlolo tsa Khalase tsa Pharmaceutical

• Ntlafatso ea Tšusumetso e Matlafatsang

PVC plastisol e etsa lera le sireletsang le tenyetsehang holim'a khalase, e ka monyang liphello tse ka ntle le ho fokotsa kotsi ea ho robeha ha botlolo (haholo-holo ea bohlokoa bakeng sa lipalangoang le ho sebetsana).
Mohlala: Bakeng sa libotlolo tsa khalase tse nang le phofo e fokolang ea lyophilized kapa tharollo ea ente, ho roala ho ka ntlafatsa haholo ts'epahalo ea liphutheloana.

• Anti-Slip le Ts'ebetso e Ntlafetseng

• Lik'hemik'hale Corrosion Resistance

PVC e bonts'a khanyetso e ntle ho li-acids tse ngata, li-alkalis, le lihlapolli tsa tlhaho, ho thibela lik'hemik'hale tse kantle ho senya khalase (mohlala, ho qoba label glue kapa lisebelisoa tsa ho hloekisa ho senya bokaholimo ba botlolo).

• Mongobo le Sethibelo sa Oksijene

Le hoja ts'ebetso e ka sehloohong ea thibelo e ntse e itšetlehile ka khalase ka boeona, ho roala ho ka fana ka thibelo e eketsehileng ea 'mele ho lieha ho kenella ha mongobo kapa likhase, tse molemo bakeng sa lithethefatsi tse sa utloeng bohloko kapa tsa hygroscopic.

• Ho ngola le ho reha lebitso

Sebaka sa ho roala se ka hatisoa ka lileibole tse hlakileng, li-logos kapa litaelo tsa tšebeliso, ho ntlafatsa sehlahisoa 辨识度 (ponahalo) le ho fokotsa litaba tsa ho ebola.

Mekhoa e Tloaelehileng ea ho Koala

Kopo ea PVC Ho roala plastisol hangata ho kenyelletsa mehato e latelang:

• Boitokisetso ba bokaholimo

Hloekisa botlolo ea khalase ho tlosa oli, lerōle, kapa lintho tse ling tse silafatsang (mohlala, ho sebelisa ho hloekisa ka ultrasonic kapa ho hlatsoa metsi a nang le khatello e phahameng).
Hlakola bokaholimo (mohlala, ka sandblasting) ho matlafatsa ho khomarela.

• Kopo ea ho roala

Mokhoa oa ho qoelisa: Kenya botlolo ea khalase e futhumetseng ka har'a tharollo ea pvc ea plastisol, ebe u e phahamisa ho etsa filimi ea mokelikeli e ts'oanang.
Ho phekola: Chesa botlolo e koahetsoeng ka 200-230 ° C bakeng sa metsotso e 2-5 ho tiisa plastisol ka filimi e teteaneng, e teteaneng (botenya hangata ke 800-1500 μm).

• Tlhahlobo ea boleng

Sheba hore na ho na le ho tšoana ha seaparo, ho khomarela (ka tlhahlobo ea sefapano), le ho hanyetsa phello (ka teko ea ho theoha).

fihlela qeto e

PVC Ho roala ka plastisol ke tharollo e sebetsang bakeng sa ho sireletsa libotlolo tsa khalase tsa meriana, ho fana ka tekanyo ea litšenyehelo, ts'ebetso le ts'ebetso. Leha ho le joalo, ts'ebeliso ea eona e tlameha ho latela melao ea litlama ka thata, e etelletse pele polokeho ea lithethefatsi, 'me e nahane ka litlamorao tsa tikoloho. Bakeng sa lithethefatsi tsa boleng bo holimo kapa tse bobebe, lisebelisoa tse ling tse kang silicone kapa epoxy li ka ba tse loketseng haholoanyane. Kamehla netefatsa ts'ebetso ea ho koahela ka liteko tse matla (mohlala, lithuto tsa botsitso, liteko tsa ho lumellana) pele ho khoebo.

Related Posts:

PVC Plastisol Coating Line le PVC Plastisol bakeng sa Tlhahiso ea Dumbbell Thermoplastic PVC Powder Coating For Dutch Wire Mesh Spot Welded Mesh Ho Khetha Molemo ka ho Fetisisa PVC Dip Coating Supplier: Lintlha tsa bohlokoa Adhesion Primer ntlafatsa tlamahano ea ho khomarela ea PVC kobo Mokhoa oa ho Felisa Sagging le Air Bubble In PVC Dip Coating, Dip Molding Polyethylene Powder Coating for Battery Box Container