Indlela yokuxhoma i-Workpiece ngokufanelekileyo kwinkqubo ye-Thermoplastic Coating Dip?

Amanye amacebiso angezantsi asenokungabi ngawona afanelekileyo, kodwa unokuzama ukuwasebenzisa. Ukuba unendlela engcono, zive ukhululekile ukwabelana nathi ngayo.

Xa kungekho mingxunya yokuxhoma okanye nayiphi na indawo phezu komhlaba yokuxhoma i-workpiece, singayixhoma njani ngcono?

• Indlela yoku-1: Sebenzisa ucingo oluncinci kakhulu ukubopha i-workpiece. Emva kwe dip ukutyabeka inkqubo igqityiwe kwaye i-coating ipholile, ngokulula ukukhupha okanye ukunqumla ucingo.
• Indlela yesi-2: Sebenzisa i-welding ukuwelda ucingo kwindawo yokusebenza. Emva kokuba inkqubo yokudibanisa igqityiwe kwaye i-coating ipholile, yinqumle ucingo.

Zombini iindlela ezingentla ziyakushiya isiva esincinci kwindawo yokuxhoma. Kukho iindlela ezimbini zokujongana nesiva:

• Indlela yoku-1: Yitshise ngomlilo ukunyibilikisa isambatho esisecaleni kwesiva kwaye sibe sicaba. Nceda Gcina umthombo womlilo ukude kancinane ukuwuthintela ukuba ujike ube tyheli.
• Indlela yesi-2: Gquba indawo yokuxhoma ngefoyile ye-aluminium uze uyi-ayine ngentsimbi yombane.

  

Ukuba umngxuma wesiva mkhulu kakhulu, kukho amayeza amabini:

• Indlela yoku-1: Gcwalisa umngxuma ngepowder encinci kwaye uyitshise nge-blowtorch (umgama we-blowtorch akufanele ube kufuphi kakhulu ukukhusela ukuba uguquke umnyama).
• Indlela yesi-2: Tshiza ipeyinti ye-epoxy yemoto kuyo.