Thermoplastic PE Polyethylene Foda Rufin
PECOAT® PE Foda don Rufin Foda na Polyethylene
PECOAT® PE Polyethylene foda ne a thermoplastic foda coatings wanda aka gyara tare da resin ƙananan yawa (LDPE) azaman tushen kayan aiki, wanda aka tsara tare da ƙari na aiki daban-daban don samar da kyakkyawan aiki. Yana da kyau kwarai mannewa, anti-lalata Properties, mai kyau sinadaran kwanciyar hankali, lantarki rufi da kuma low zafin jiki juriya na polyethylene kanta. Yawanci, ana amfani da su ko'ina don sutura samfuran waya na gida da masana'antu. Wannan shi ne saboda suna samar da sutura mai santsi kuma mai ban sha'awa wanda ke da wuyar iya jurewa da lalacewa mai tsanani.
main Features
Dukanmu mun san cewa don inganta mannewa, ya zama dole a yi amfani da maɗaukaki tsakanin sassa da foda. Amma mu polyethylene foda ne musamman danko, ya karya wannan iyaka. Don haka babu abin da ake buƙata kuma! Bugu da ƙari, yana ba da kyakkyawan kariya mai kyau da kuma kyakkyawan ɗaukar hoto; don haka, yana iya jure mummunan tasiri ba tare da an kwaɓe shi cikin sauƙi ba.
Yana da tasiri mai kyau da juriya na abrasion, wanda ke nufin rufin polyethylene foda yana da tsayin daka don tsayayya da shekaru masu tsanani da amfani. A lokaci guda, yana da kyakkyawan juriya na lalata, juriya na ruwa da rufin lantarki.
Ya dace da aikace-aikace iri-iri, na cikin gida ko na waje. A lokaci guda kuma, suna da kyakkyawan aiki a ƙananan yanayin zafi ba tare da ɓata kwanciyar hankali na thermal da juriya mai tsauri ba.
Yana da kama da kaddarorin zuwa PVC foda amma ya fi dacewa da muhalli kamar yadda ba ya saki hayaki maras so yayin aikin sutura.
Yana da tsawon rayuwar sabis saboda kyakkyawan yanayin su, kwanciyar hankali UV da juriya na lalata. Har ila yau, yana da matukar juriya ga sinadarai kamar acid, alkali da gishiri.
Ana iya amfani da shi mafi bakin ciki fiye da na yau da kullum na polyethylene foda ba tare da lalata mutunci ba. Har ila yau, yana kawar da buƙatun buƙatu saboda tsananin mannewa. Sabili da haka, yana iya adana farashin kayan mahimmanci. A lokaci guda, dadewar sa yana haɓaka ƙimar farashi.
Wasu Shahararrun Launuka
Game da Launuka na PE Polyethylene Foda Rufin
Za mu iya bayar da kowace launi da aka keɓance don dacewa da buƙatunku. Nassoshi kan Launi
Amfani Kasuwa
PECOAT® Thermoplastic polyethylene foda coatings an tsara don tauri, m da kuma anti-lalata yi, ba tare da firamare. Kayan yana da alaƙa da muhalli, babu VOC, babu hayaki mai haɗari yayin amfani. Its guda Layer thermoplastic coatings samar da dogon lokacin da ceto a kan kiyayewa, abu farashin da kuma aiki kudin , kuma ana amfani da fadi da kewayon masana'antu.
PECOAT® samar da ɗorewa, tauri da ƙarancin farashi don farar kaya na cikin gida, kamar ɗakunan waya na ƙarfe, kwandunan injin wanki da grid na firiji, da sauransu.
- Kyakkyawan juriya na sinadarai
- Ingantacciyar juriyar zafin jiki
- Kyakkyawan juriya na inji
- Saduwa da abinci
- Mu'amala da muhalli
- M gama
- Kyakkyawan taurin saman
Ornamental, welded raga, sarkar mahada ko kowane irin shinge irin, kowane nau'i ya kawo ta hadaddun ga wani shafi tsari. PECOAT® Rubutun thermoplastic suna ba da isasshen sutura ga duk nau'ikan yanayi daban-daban na shingen ku zai iya zama batun da salon shingen ƙarfe da kuke amfani da su.
- Dogon lokaci karko
- Ƙarƙashin lalata kyama
- Babban tasiri da juriya na abrasion
- kwanciyar hankali UV
- Juriyar yanayi (yanayin yanayi, zafi, bambancin yanayin zafi)
- Kariya na galvanized substrates
- Mu'amala da muhalli
PECOAT® polyethylene foda shafi tare da m da m Yi aiki iya gamsar da bukatun na gida da kuma waje kayan aikin waya, samar da dogon m yi a ciki da waje yanayi.
- Kyakkyawan juriya ga zafin jiki
- Kyakkyawan kwanciyar hankali UV, babu launin rawaya na samfuran fararen fata
- M shafi, babu hadarin fatattaka, chipping ko flaking
- Mu'amala da muhalli
- Kyakkyawar murfin ƙarfe, gami da ga gefuna masu kaifi da walda
- M gama
- Kyakkyawan taurin saman
Kayan daki na cikin birni suna da saurin kamuwa da lalata daga ruwan sama na acid, gurɓataccen iska, gishirin hanya, canjin yanayin zafi, da tsugunar kare. Ƙasashen kayan daki yana da rauni musamman ga gishiri da datti na kare, kuma dole ne su yi tsayin daka da aikin injina. PECOAT® thermoplastic foda shafi yana da kyawawan kaddarorin kuma zai iya samar da isasshen kariya ga kayan gida na gari.
- Kyakkyawan sinadarai da juriya na lalata
- Babban tasiri da juriya na abrasion
- kwanciyar hankali UV
- Kariya na galvanized substrates
- Taɓawa mai taushi
- Abokan muhalli (babu VOC, kyauta halogen, kyauta BPA)
PECOAT® yana ba da suturar foda na thermoplastic don akwatunan baturi, yana ba da ingantaccen rufin lantarki, kuma a halin yanzu yana kare simintin baturi daga lalatawar acid.
- Acid juriya
- Kyakkyawan mannewa yayin sassauƙa
- Kyawawan kaddarorin rufewa
PECOAT® Za a iya amfani da suturar thermoplastic don kare kowane nau'in kayan haɗi na mota: akwatunan kekuna, tankunan mai na bututu, kwandon baturi, rataye kofa, chassis, maɓuɓɓugar ruwa ko duk sauran sassan da aka fallasa ga tasirin dutse.
- Babban juriya na lalata, juriyar mai
- Babban tasiri da juriya na abrasion
- kwanciyar hankali UV
- Babban mannewa da sassauci
- Rufin lantarki
PECOAT® Fire Extinguisher Cylinder Coating an tsara shi musamman don sutura cikin ruwa da kuma kumfa mai cike da wutar lantarki, ana amfani da shi ta hanyar jujjuyawar jujjuyawar zuwa silinda na ƙarfe don ba da kariya mai kariya tare da kyakkyawan juriya ga yanayin ruwa, ciki har da wakilin kumfa AFFF kuma shi ma resistant zuwa 30% Antifreeze (ethylene glycol).
Wutar wutar lantarki wani abu ne mai haɗaka da aka yi da bututun ƙarfe a matsayin tushe, an rufe shi da murfin foda na polyethylene akan bangon ciki da na waje ta hanyar tsari na musamman kuma an warke a babban zafin jiki. Saboda kyakkyawan ƙarfin tsoma baki na siginar siginar da yake da kyau, ana amfani da shi a ayyukan kariyar wutar lantarki a wurare daban-daban.
PECOATSaukewa: PP506 polyethylene foda an ƙera shi don shafa magudanar igiyar ruwa (ikon wutar lantarki). Yana da wani ƙarfi-free, 100% m foda shafi ɓullo da tare da high-yi polyethylene matsayin tushe guduro da kuma hade da daban-daban na musamman resins. Wannan samfurin yana da babban mannewa, kyakkyawan juriya na tsufa, juriya na yanayi, kyakkyawan iya tafiyarwa, da fasali kamar su marasa ƙarfi, mara ƙazanta, abokantaka da muhalli, da ceton kuzari.
Kara karantawa >>
shiryawa
25Kg/Bag
PECOAT® thermoplastic polyethylene foda shafi da farko an shirya shi a cikin jakar filastik don hana samfurin daga gurbatawa da damp, da kuma guje wa zubar da foda. Sa'an nan kuma, an cika su da jakar da aka saka don kiyaye mutuncinsu da kuma hana jakar filastik ta ciki daga lalacewa ta hanyar abubuwa masu kaifi. A ƙarshe sai a palletize duk jaka kuma a nannade shi da fim mai kauri don ɗaure kayan.
Yanzu shirye don bayarwa!
Nemi Samfura
Samfurin yana ba ku damar fahimtar samfuranmu gaba ɗaya. Cikakken gwaji yana ba ku tabbacin cewa samfuranmu za su iya aiki daidai akan aikin ku. Kowane samfurin mu an zaɓa a hankali ko kuma an tsara shi bisa ga ƙayyadaddun abokan ciniki. Daga ƙirar ƙira, zaɓin albarkatun ƙasa zuwa samarwa, muna yin ƙoƙari da yawa don tabbatar da nasarar fara haɗin gwiwa.
Yanayin substrate daban-daban yana da buƙatu daban-daban don kayan shafa, kamar mannewa, ikon gudana, juriyar zafin jiki, da sauransu, waɗannan bayanan sune tushen ƙirar samfurin mu.
Don haɓaka damar samun nasarar gwajin samfurin, da kuma kasancewa da alhakin ɓangarori biyu, da fatan za a ba da bayanin mai zuwa. Na gode kwarai da kulawar ku da hadin kai.
Yanayin substrate daban-daban yana da buƙatu daban-daban don kayan shafa, kamar mannewa, ikon gudana, juriyar zafin jiki, da sauransu, waɗannan bayanan sune tushen ƙirar samfurin mu.
Don haɓaka damar samun nasarar gwajin samfurin, da kuma kasancewa da alhakin ɓangarori biyu, da fatan za a ba da bayanin mai zuwa. Na gode kwarai da kulawar ku da hadin kai.
FAQ
Domin bayar da ingantattun farashi, ana buƙatar bayanin mai zuwa.
- Wane samfurin kuke sutura? Gara a aiko mana da hoto.
- Menene substrate abu, galvanized ko mara galvanized?
- Don gwajin samfurin, 1-25kg / launi, aika ta iska.
- Don tsari na yau da kullun, 1000kg/launi, aika ta teku.
2-6 kwanakin aiki bayan biya kafin lokaci.
Ee, samfurin kyauta shine 1-3kg, amma cajin sufuri ba kyauta bane. Don cikakkun bayanai, da fatan za a danna Nemi Samfura
Da fatan za a koma ga wannan Labari
Akwai wasu shawarwari:
- Cire injina: Yi amfani da kayan aiki irin su takarda yashi, gogayen waya, ko ƙafafu masu ƙyalli don gogewa ko niƙa murfin.
- Dumama: Aiwatar da zafi zuwa rufi ta amfani da bindiga mai zafi ko wasu na'urorin dumama don sauƙaƙe cire shi.
- Masu tarwatsa sinadarai: Yi amfani da madaidaitan sinadarai waɗanda aka tsara musamman don suturar foda, amma bi matakan tsaro yayin amfani da su. Wannan acid mai ƙarfi ne ko tushe mai ƙarfi.
- Sandblasting: Wannan hanyar na iya cire murfin amma yana buƙatar injin fashewar yashi.
- Scraping: Yi amfani da kayan aiki mai kaifi don cire murfin a hankali.
Yi Amfani da Hanya
The preheated workpiece ne gaba daya immersed a ciki gado mai ruwa. Foda ya narke akan hulɗa da kayan aikin kuma ana ɗaga kayan aikin daga gadon mai ruwa. Sa'an nan kuma an sanyaya kayan aikin don barin sutura mai inganci.
- Kafin magani: Ana cire mai da tsatsa ta hanyar sinadarai ko fashewar yashi.
- Preheat Workpiece: 250-320 ℃ [gyara bisa ga workpiece].
- Dip Mai Ruwa Mai Ruwa: 4-8 seconds [daidaita bisa ga aikin aiki].
- Bayan zafi (na zaɓi): 180-250 ℃, 5 mintuna [Amfani don samun mafi kyawun wuri].
- Cooling: An sanyaya iska ko sanyaya ta halitta.
Tsarin mu na lantarki na cryogenically-ƙasa foda suna da kyau da za a yi cajin lantarki da fesa a kan kayan aikin ƙarfe na ƙasa. Ana sanya kayan aikin ƙarfe a cikin tanda masana'antu kuma a yi zafi har sai foda ya narke. Ana sanyaya abubuwa don barin sutura mai inganci. 
Kayan aikin da za a shafa za a yi preheated a yanayin da ya dace, dangane da kaddarorinsa, kauri, da ƙarfin zafi. Ana hura foda marar caji akan karfen mai zafi, inda ya narke kuma ya zama abin rufe fuska. Sa'an nan kuma an ba da izinin abu don yin sanyi don barin sutura mai inganci. 
Abun da ke buƙatar sutura, yawanci kwalban, bututu ko silinda, ana yin zafi har zuwa zafin da ake buƙata. Ruwan gado mai ruwa sai a yi masa allura a cikin abin. Nan da nan sai a jujjuya abin kuma a jujjuya shi don ba da cikakkiyar sutura mai daidaituwa a cikin kwalbar. Ana fitar da duk wani foda da ba a yi amfani da shi ba daga cikin abin. 
The thermoplastic foda ne tarwatsa ta cikin bindiga bututun ƙarfe da hura a cikin harshen wuta halitta a kusa da bututun ƙarfe, da foda narkewa a kan hanya daga gun zuwa workpiece surface da nan take juya m shafi a lõkacin da ya zo a lamba tare da workpiece. Misalin aikin
PECOAT®315 PE Rufin Foda don Rataye Tufafi
PECOAT® Polyethylene Foda don nau'in C irin Karfe
Babban Hanya Guardrail Fentin da PECOAT® Polyethylene Foda
PECOAT® PVC da Rufin Polyethylene don Ramin Waya
PECOAT® Rufin thermoplastic don bututu mai hana lalata
PECOAT® Foda na PE don Grid na Firiji da Kwandon Waya.
PECOAT® PES Polyethylene Foda Coat don Brassiere Clips. Kyakkyawan juriya na sawa
PECOAT® PE Lining Coating Powder don Bututun Karfe
PECOAT® Thermoplastic Foda don Akwatin Baturi, Babban Anti-lalata
Kwandon Wayar Firiji Mai Rufa da shi PECOAT® 201 PE Foda
PECOAT270 Polyethylene Rufin Foda don Bututun Karfe
Kayan Wasannin Mashin ƙarfe Mai Rufe Da shi PECOAT®301 PE Foda
Waya Shelves Racks Mai rufi da PECOAT® PE Foda
PECOAT® foda na foda don C-Type Broda, babban anti-collossion
PECOAT® Rufin Foda na Thermoplastic don Shirye-shiryen Baturi
PECOAT® 236 Rufin Foda na Polyethylene don Shelves na Daskarewa
PECOAT® 400 Black PE Powder Rufin don Maɗaurin Hinger
PECOAT® 301 Grey Color PE Rufin Foda don Tallafin Rebar
PECOAT® PP507 Green Launuka don Cable Conduit, Karfe Bututu
PECOAT® Foda na Thermoplastic don Fasa Harshen Harshe
PECOAT® PE Plastic Powder Coating for Wiggle Wire for Greenhouse
PECOAT® PE foda don plating racks jigs, resistant zuwa acid da high zafin jiki
Rufe foda na Thermoplastic PE don Rukunin Rukunin Kujerun Teku da Kujerar Park
PECOAT® Thermoplastic PE Powder Coating don Babu Tankin Ma'ajiyar Hasumiya
Yi amfani da Bidiyo
1
/
8
Thermoplastic foda shafi tsoma tsari atomatik nutsewa ga waya kwandon, polyethylene foda
Atomatik tsoma layin fluidized gado foda shafi kayan aiki
Polyethylene foda shafi tsoma tsari PECOAT.com
Fluidized gado tsoma shafi thermoplastic tsoma foda don babbar hanyar shinge
PE Polyethylene Thermoplastic Foda Rufin Samfurin, Mai bayarwa PECOAT.com
Polyethylene PE Thermoplastic Foda Rufin Samfurin, Maroki PECOAT.com
1
/
8
PE Powder Coating VS PVC Foda Cike
| PE Powder Coating | PVC Foda Cike | |
|---|---|---|
| Maganin Zazzabi | 180-220 ℃ | 230°C-250°C (ƙarin amfani da makamashi) |
| Yankin Kyau | A | A'a (mummunan iskar gas HCL yayin amfani) |
| Ciki Mai Ruwa | 200-2000μm (fadi kewayon kauri, sauƙin sarrafawa) | 800-1000μm (kunkuntar kewayon kauri, saba bakin ciki shafi) |
| Amfanin Foda (a kauri iri ɗaya) | Kadan | Kara |
| surface | M | A bit m, ba sosai santsi |
| Adhesion Ability | m | Babu, ana buƙatar firamare na musamman |
| price | high | mai rahusa |