Thermoplastic polyvinyl chloride PVC Foda Cike
PECOAT® Polyvinyl chloride foda don PVC Foda Cike
PECOAT® PVC foda shafi wani nau'i ne na thermoplastic foda shafi tsara don dacewa da gado mai ruwa tsarin tsomawa. Polyvinyl chloride ne ya yi shi (PVC) guduro a matsayin tushe abu da kuma ƙara plasticizers, pigments da sauran Additives. Irin wannan nau'in sutura yana da kyakkyawar sinadarai, juriya na jiki da na inji, kuma ana amfani dashi a aikace-aikace inda ake buƙatar sassauci, karko, da juriya ga yanayi mai tsanani.
Polyvinyl chloride (PVC) Rufin foda yana da kyakkyawan juriya na yanayi, kyakkyawan juriya na lalata, ƙarfin injiniya mai ƙarfi, ƙarancin wutar lantarki mai kyau. Hakanan yana da ƙarancin farashi kuma yana da tasiri.
Duk da haka, PVC Foda shafi kuma yana da wasu rashin amfani. Bambanci tsakanin zafin jiki na narkewa da zafin jiki na bazuwar PVC resin yana da ƙananan, kuma kula da zafin jiki yana da matukar damuwa don kauce wa rugujewar shafi yayin aikin sutura. Ana fitar da iskar gas mai cutarwa yayin aikin tsomawa. Fuskar rufin yana da ɗan ƙanƙara kuma yana da wuya a yi amfani da sutura mai kauri. Saboda matalauta adhesion na PVC shafi, ana buƙatar firamare na musamman don waɗannan samfuran da ke buƙatar babban mannewa.
Za mu iya bayar da kowace launi da aka keɓance don dacewa da buƙatunku. Nassoshi kan Launi
PECOAT® thermoplastik PVC foda kayan shafa an tsara don tauri, m da kuma anti-lalata yi, ba tare da firamare. Its guda Layer thermoplastic coatings samar da dogon lokaci ceto a kan kiyayewa, kayan farashin da kuma aiki kudin , kuma ana amfani da wani fadi da kewayon masana'antu, kamar electro-welded cibiyoyin sadarwa, welded waya raga, karfe waya, karfe bututu, punching raga; wurin shakatawa, tsakar gida, shingen lambu, shingen hanya, shingen zama, firam ɗin ƙirar kayan masarufi, kantin kantin sayar da kayayyaki, rataye, kwandon keke, kejin kiwo; kiyaye babbar hanya, da dai sauransu.
Tsarin Dip Mai Ruwa Mai Ruwa
- Pretreatment: Tsaftace kuma cire tsatsa da mai ta hanyar phosphating ko fashewar yashi.
- Aikace-aikacen Farko: Don ba da mannewa mai kyau, ana amfani da firamare na musamman (tushen ruwa) ta hanyar nutsewa ko gogewa.
- Preheating workpiece: 250-300C (daidaita bisa ga workpiece, watau karfe kauri)
- Tsoma cikin Bed Mai Ruwa: 4-20 seconds (daidaita bisa ga kauri da siffa)
- Bayan dumama zuwa warkewa: 230-250 ° C, 0-5 mintuna
- Cooling: sanyaya iska ko sanyaya yanayi
25Kg/Bag
PECOAT® thermoplastic PVC an fara tattara foda a cikin jakar filastik don hana samfur daga gurbatawa da dasawa, da kuma guje wa zubar foda. Sa'an nan kuma, an cika su da jakar da aka saka don kiyaye mutuncinsu da kuma hana jakar filastik ta ciki daga lalacewa ta hanyar abubuwa masu kaifi. A ƙarshe sai a palletize duk jaka kuma a nannade shi da fim mai kauri don ɗaure kayan.
Yanzu shirye don bayarwa!
Yanayin substrate daban-daban yana da buƙatu daban-daban don kayan shafa, kamar mannewa, ikon gudana, juriyar zafin jiki, da sauransu, waɗannan bayanan sune tushen ƙirar samfurin mu.
Don haɓaka damar samun nasarar gwajin samfurin, da kuma kasancewa da alhakin ɓangarori biyu, da fatan za a ba da bayanin mai zuwa. Na gode kwarai da kulawar ku da hadin kai.
- Wane samfurin kuke sutura? Gara a aiko mana da hoto.
- Menene substrate abu, galvanized ko mara galvanized?
- Don gwajin samfurin, 1-25kg / launi, aika ta iska.
- Don tsari na yau da kullun, 1000kg/launi, aika ta teku.
- Cire injina: Yi amfani da kayan aiki irin su takarda yashi, gogayen waya, ko ƙafafu masu ƙyalli don gogewa ko niƙa murfin.
- Dumama: Aiwatar da zafi zuwa rufi ta amfani da bindiga mai zafi ko wasu na'urorin dumama don sauƙaƙe cire shi.
- Masu tarwatsa sinadarai: Yi amfani da madaidaitan sinadarai waɗanda aka tsara musamman don suturar foda, amma bi matakan tsaro yayin amfani da su. Wannan acid mai ƙarfi ne ko tushe mai ƙarfi.
- Sandblasting: Wannan hanyar na iya cire murfin amma yana buƙatar injin fashewar yashi.
- Scraping: Yi amfani da kayan aiki mai kaifi don cire murfin a hankali.
Dangane da kasuwa daban-daban, wasu samfurori suna buƙatar mannewa mai ƙarfi don sutura. Duk da haka, PVC coatings inherently rasa mannewa Properties. Dangane da haka. PECOAT® ya ƙirƙira ƙwararren mannewa na musamman don haɓaka ƙarfin mannewa na PVC sutura. Kawai goge su ko fesa su daidai a saman karfen da za a shafa kafin aikin tsomawa. Abubuwan da ake amfani da su na samfuran da aka yi da mannewa suna nuna mannewa na musamman ga rigunan filastik, kuma yana da wahalar kwasfa.
- Yanayin aiki: 230 - 270 ℃
- Marufi: 20kg/Jin filastik
- Launi: m kuma mara launi
- Musamman nauyi: 0.92-0.93 g/cm3
- Adana: 1 shekaru
- Yi amfani da hanyar: goge ko fesa
Kawaici PVC Rufin Foda Don Ramin Waya Yaren Holland Spot Welded Mesh
PVC Masu Kawo Rufin Foda A China
Electrostatic Spray Polyvinyl ChloridePVC) Rufin Foda: Jagora mai zurfi
Polyvinyl chloride (PVC) Rubutun Foda - Haɓaka, Aikace-aikace, Ƙarfafawa
PVC Rufi da Rufe foda
Thermoplastic Polyethylene LDPE Foda Coat na Tufafi Hanger
Semi-atomatik Dip Powder Layin Rufe don Anti-hau Net Mesh Wire
