description
PECOAT® pvc plastisol tsoma shafa kayan aiki galibi sun ƙunshi tanda preheat, tanda bayan zafi, tankin abu, tsarin tsomawa da waƙoƙin sarƙoƙi. An tsara shi musamman don tsarin tsomawa na pvc plastisol.
Tsarin Gudun Gabaɗaya
- Preheat kayan aikin: Sanya kayan aikin a cikin tanda preheat kuma kiyaye mintuna da yawa don tabbatar da dumama kayan aikin.
- A nutse cikin sol: Sanya kayan aikin da aka riga aka yi amfani da su a cikin tankin plastisol ta hanyar kayan aikin injiniya ko aikin hannu, da sarrafa lokacin (misali, 2-6 seconds) don samar da suturar uniform.
- Post-zafi don warkewa: Canja wurin workpiece mai rufi da sol zuwa ga tanda bayan zafi don warkewa, zafi shi a saita zazzabi (misali, 200 ℃) don takamaiman lokacin (misali, mintuna 2-5) don samar da shafi.
Maɓalli Maɓalli Tsakanin Manual da Atomatik
| iri | Yanayin aiki |
|---|---|
| manual | An raba tanda da tankunan kayan aiki ta jiki, kuma ana aiwatar da canja wurin kayan aikin ta hanyar aikin hannu. |
| Semi-atomatik | An haɗa tanda da tankunan kayan aiki ta hanyar waƙar sarƙoƙi, motsi na kayan aiki tare da waƙoƙin da hannu. |
| Cikakken atomatik | An haɗa tanda da tankunan kayan aiki ta hanyar waƙoƙin sarƙoƙi, motsi na aiki akan waƙoƙin yana da ƙarfi. |
bayani dalla-dalla
| type | Semi-atomatik |
|---|---|
| Tushen dumama | Wutar lantarki |
| amfani | Dip shafi don samfurin karfe |
| Abun shafi | PVC plastisol |
| Nau'in shiryawa | Wooden case |
| gubar lokaci | 20-25days bayan biya kafin lokaci |
| Girman kayan aiki | Kamar yadda aka tsara |
| Hanyar rufewa ta tanda | Ma'adinai ulu Layer |
| Lambar Tankin Kaya | 1-2, bisa ga buƙatu |
| Kayan tanda | bakin karfe |
| Output iya | Kamar yadda aka tsara |
| Na'urorin haɗi | 3-5pcs dumama tube |
| irin ƙarfin lantarki | A cewar kasar abokin ciniki |
| Turin kofa | Jirgin sama |
| Hanyar mai zafi | Bututu mai zafi |
| Material na dumama tube | bakin karfe |
| Abubuwan da mai siye zai shirya | 1. PVC plastisol (PECOAT® na zaɓi) |
| 2. 5.5kw dunƙule kwampreso (an ba da shawarar) | |
| 3. 1 cubic gas tank tank (shawarwari) |
Bidiyon aikin
1
/
4
Kariyar Mota & Hasken Haɗawa Mai Hana Karo Cikakke Ta atomatik PVC Layin Rufe Jiki na Plastisol #dipcoatingline
Layin rufe bututun filastik na PVC mai amfani da atomatik don sandar bas. Kayan aikin rufe bututun ƙarfe na tagulla.
tsoma hannu PVC shafi don maƙallan kebul na nau'in R.
Semi-atomatik PVC Injin shafawa mai laushi don rataye tufafi, tare da aikin juyawa
PVC Injin shafawa na dip na plastisol da ruwa, tsarin dip na launuka biyu.＃ injin pvcplastisol
Cikakken tsomawa ta atomatik PVC Na'urar Shafi Don Hannun Ball Bawul, kayan aikin shafa tsoma
1
/
4
Klein –
Kwanaki nawa zaku kawo bayan oda?
Volley -
Kuna da injin pvc foda tsoma inji?
Heig –
Kuna da injin pvc foda tsoma kayan shafa?
PECOAT -
This equipment is customzied , production time is usually 25-30days