Fusion Bonded Epoxy FBE Foda Coat don Bututun 3LPE

Fusion Bonded Epoxy (FBE) foda shafi ne yawanci amfani da lalata kariya shafi ga 3LPE bututun. Ana amfani da shi zuwa saman waje na bututun don samar da shinge mai dorewa da kariya daga lalata.

Yawanci ana shafa murfin foda na FBE ta amfani da feshi na lantarki ko hanyoyin gado mai ruwa-ruwa . Ana dumama foda kuma yana narkewa a saman bututun, yana samar da shafi mai ci gaba da daidaito. Da zarar ya huce, murfin FBE yana ba da kyakkyawan mannewa da juriya ga sinadarai, danshi, da gogewa.

Tsarin suturar bututun mai na 3LPE ya ƙunshi nau'i uku: FBE primer, maɗaukakiyar manne, da rigar polyethylene. Fusion Bonded Epoxy primer yana aiki azaman wakili na haɗin gwiwa tsakanin saman karfe da mannen Layer, yana tabbatar da mannewa mai kyau. Layer na manne yana ba da ƙarin kariya ta lalata kuma yana aiki azaman haɗin haɗin gwiwa don saman saman polyethylene.

PECOAT® tare da haɓakawa da kuma samar da babban aikin Fusion Bonded Epoxy foda shafi, wanda akasari ya ƙunshi resins na musamman kuma an tsara shi tare da ingantaccen ƙari da takamaiman kayan aikin. Yana da dacewa mai kyau tare da mannen copolymer a cikin 3PE anti-lalacewa don bututun bututun, kuma ana amfani dashi don sutura ko tsarin nutsewa don aiwatar da ayyuka da ginawa akan sassan bututun ƙarfe. Ba wai kawai yana da kyakkyawan juriya na lalata ba har ma da fitattun kayan aikin injiniya, wanda ya sa ya dace da yanayin yanayi daban-daban a duk duniya.

Launuka: Grey, blue, kore, da dai sauransu za a iya keɓance su.
Matsayin aiwatarwa: GB/T 23257-2017 da SY/T 0315-2005.

halaye

1. Launi na Uniform, babu agglomeration ko lumping
2. Ƙarfin haɗin gwiwa tare da manne Layer na anti-lalata
3. Babban aikin peeling cathodic da ƙarfin dielectric
4. Ƙarfin juriya ga lalata sinadarai kamar acid, alkali

Ayyukan Foda

Ayyukan Rufe

Hanyar Aikace-aikacen Fusion Bonded Epoxy

1. Cire Tsatsa, Mai Da tarkace Daga Fannin Ƙarfe: Harba fashewar fashewar fashewar yashi zuwa matakin Ss2.5 da aka ƙayyade a cikin GB/T8923; Zurfin ƙirar 50-70um; Busa ƙura da abrasives a saman saman ƙarfe .
2. The preheating zafin jiki na anticorrosive sassa ya kamata a sarrafa a 200-240 ℃, da kuma ainihin yi za a iya gyara bisa ga on-site yi yanayi.
3. Yi amfani da hanyar fesa electrostatic don aikin gini (ƙarfin wutar lantarki tsakanin 60-90kv, nisa mai nisa tsakanin 150-200mm), kauri na 100-150um.
4. Ya kamata yanayin ginin ya kasance bushe da tsabta.
5. Ya kamata a buɗe foda na epoxy kuma a yi amfani da shi yadda ake buƙata, sauran samfuran kuma yakamata a rufe su cikin lokaci don guje wa gurɓataccen ƙura da danshi a cikin iska.

Kunshin da Ajiya Na Fusion Bonded Epoxy

1. Karton da jakar tattarawa ta ciki: 25kg/Box.
2. Ka guje wa fallasa zuwa rana, ruwan sama, nesa da wuta, zafin jiki shine ≤35 ℃ ya dace.
3. Tsawon tsayi ≤5 yadudduka don kauce wa matsa lamba, tabbatar da iska, hana danshi (danshi mai danshi <75%).
4. Rayuwar rayuwa na watanni 12.

Lafiya, Tsaro da Kariyar Muhalli

1. A lokacin amfani, ya zama dole don ƙarfafa kariya ta hanyar sanya abin rufe fuska na kura da tabarau don hana ƙurar shiga baki da idanu.
2. Dole ne a yi amfani da shi a cikin yanayi mai kyau, kuma ƙurar ƙura a cikin iska dole ne ya zama ƙasa da 20g / cm3 don kauce wa fashewa.
3. An haramta shan taba a wurin amfani, kuma an hana buɗe wuta sosai. Dole ne a samar da masu kashe wuta, kuma dole ne a shirya shirye-shiryen gaggawa a gaba.
4. Idan an shaka ko an sha, a nemi likita nan da nan.
5. Ba za a iya sake amfani da sharar gida ba kuma a aika da shi zuwa tashar sharar don magani na tsakiya.